Wiring a Doorbell

The best time to plan the accession for base a doorbell is if the walls and ceilings are still accessible during new architecture or remodeling. If you wish to install a doorbell for the aboriginal time in a accomplished house, you may wish to accede a wireless doorbell so you don't accept to cut into the walls to do the wiring.
Wiring a doorbell in a new home is actual easy. Doorbell base is low voltage base which uses about 12-volts. The wire admeasurement is about 18-gauge wire. It's in fact alleged doorbell wire, so you can't go amiss with that.
You will charge to run the wire from anniversary doorbell aback to the doorbell transformer. Doorbell base requires a agent that connects to a 120-volt circuit. It reduces the electric voltage to about 12-volts.
Be abiding to about-face off the electricity afore you wire the doorbell agent to the abode power. About-face off the breaker and acquaint added ancestors associates what you are doing.
The agent will accept a hot spiral and a aloof screw. The atramentous wire from the abode ability will affix to the hot spiral and the white wire will affix to the aloof screw. This will accord the doorbell agent power. There will be one hot wire and one aloof wire that runs from the agent to the bell box.
The doorbell base will use two hot curve that run from the bell box to the doorbell. If the doorbell is authoritative two locations, again it will a lot of acceptable accept two altered angelus so you apperceive which aperture to answer. The cable will affix to the agent with two hot screws for anniversary doorbell. The cable will aswell attach to anniversary doorbell with these two hot cables. If the doorbell button is pushed, the ambit will complete the electrical accepted and the doorbell will chime.
Once all the affairs are attached, you can defended the doorbell, bell box, and transformer. About-face on the abode ability and analysis the doorbell.
To alter an absolute doorbell, you will alone charge to abstract the old doorbells and alter them with the newer bells. If you wish a altered chime, again you will charge to alter the bell box by removing the old base and abutting the newer wiring.
In some cases, you will charge to alter the agent for a new doorbell and bell if it needs altered voltage to action properly. This can be done by first, disconnecting the abode power, again replacing the agent with the new transformer. After that you can about-face the ability aback on and analysis the new doorbell system.